Click on the pattern titles below to connect to the written instructions.
Fiber Images™ accepts no responsibility for the accuracy or correctness of any free patterns listed on this page.
Lacy Double Crochet Mobius
Roll-Brimmed Hat by Craft Yarn Council of America
Ribbed Crochet Hat by Craft Yarn Council of America
Tam (Adult or Child)
Crocheted Patches Slippers
Ruffle Edge Slippers
Scrap Slippers by Craft Yarn Council of America
Crocheted Waistcoat
Lightweight Pocketed Vest
Priceless Pretzel Pullover Stripe Sweater (Beginner)
Priceless Pretzel Pullover Stripe Sweater (Intermediate/Advanced)
Quickie One Skein Lacy Top or Vest
Triangular Shell Shawl
Lacy Double Crochet Mobius
worsted weight yarn
# I or J crochet hook or whatever sized hook will produce 4 sts/inch
Ch 65.
Dc in 2nd ch from hook, work dc across row. Ch 2, turn. Repeat until piece measures 62” Fasten off.
Lay out flat. Turn one end over so piece is twisted. Join ends as invisibly as possible. Weave in ends as required.
This scarf may also be worked in any reversible stitch pattern.
This pattern is copyrighted and printed with permission and may be used for your personal use only.
It may not be copied or reproduced in any form, sold, or copied or posted to another web site.
Roll-Brimmed Hat by Craft Yarn Council of America
gauge: 4 dc = 1”, 4 rows – 2”
H hook, 4 oz. worsted weight yarn, #16 tapestry needle for finishing
Foundation Ch: Ch 4, loosely, slip st into last ch from hk to form ring
Round 1: Ch 3, do not turn, work 11 dc into ring (12 sts). Place marker or safety pin on turning ch to keep track of beginning of rounds. Move marker up with each round.
Round 2: Work 2 dc in top of ch in prev row, 2 dc in ea dc of prev rnd (24 dc).
Round 3: *1 dc in 1st dc, 2 dc in next dc; repeat from * to end of rnd (36 sts).
Round 4: *2 dc in 1st dc, 1 dc in each of the next 2 dc; repeat from * to end of round (48 sts).
Round 5: 1 dc in ea of the first 2 dc, *2 dc in next dc, 1 dc in ea of next 3 dc; repeat from * to end of rnd ending with 1 dc in last st (60 sts).
Round 6: 1 dc in ea of next 2 dc, *2 dc in next dc, 1 dc in ea of next 4 dc, repeat from * to end of rnd, ending with 1 dc in each last 2 sts (72 sts).
Round 7: *2 dc in 1st dc, 1 dc in ea of next 5 dc, repeat from * to end of rnd (84 sts).
Round 8: Piece should be flat, measuring 7” across. This is the crown of the hat. Dc in each dc to end of rnd.
Continue working even in rnds on 84 sts till hat measures 11” from the center to the edge, leaving the last 3 sts of last rnd. Work 1 dc in next st, 1 hdc in next, 1 sc in last st; sl st in next dc. End.
This pattern is copyrighted and printed with permission and may be used for your personal use only.
It may not be copied or reproduced in any form, sold, or copied or posted to another web site.
Ribbed Crochet Hat by Craft Yarn Council of America
Finished Sizes: Adult Small 19”, Large 21”
Directions are given for size small. Changes for large are in parentheses.
Materials Needed: 3-1/2 (4) oz [98(112) grams] worsted weight yarn
Size I (5-1/2 mm) crochet hook
yarn needle
Gauge: sc, working in back loop only, on size I hook, 7 sts = 2”, 4 rows = 1”
Be sure your own gauge corresponds with this gauge. Adjust hook size if necessary.
Hat Instructions:
Loosely ch 41(46).
Row 1: (wrong side row) Work 1 sc in 2nd ch from hook and in each ch to end. There are 40(45) sc. Ch 1, turn.
NOTE: Work in back loop only through all following rows.
Row 2: (right side row) Work 35(40) sc, sk last 5 sc. Ch 1, turn.
Row 3: Work 35(40) sc. Ch 1, turn.
Row 4: Work 40(45) sc, working into the sc sts left unworked in Row 2. Ch 1, turn.
Row 5: Work 40(45) sc. Ch 1, turn.
Repeat Rows 2-5 until piece measure 19” (21”) at the widest end. Last row worked is Row 4.
Finishing:
With right sides facing, fold hat so the first and last row worked meet each other. Working from top to bottom of hat, sl st across last row completed and first row, being careful to match stitches. Break off yarn. Thread a 12” length of yarn into a yarn needle. With yarn needle, weave through sts at top of hat drawing sts together tightly. Fasten yarn securely on the wrong side. Finish off all yarn ends into seam on wrong side. Turn up edge of hat like a cuff.
Optional: Make and attach a pom-pom firmly to top of hat by threading the tails from the pom-pom through to the inside of hat. Secure the tails on the inside and weave in ends. See How-To Make A Pom-Pom.
copyright © 1985, Craft yarn Council of America, P.O. Box 9, Gastonia, North Carolina 28053. This pattern is copyrighted and printed with permission and may be used for your personal use only.
It may not be copied or reproduced in any form, sold, or copied or posted to another web site.
Tam (Adult or Child)
worsted weight yarn
“G” or “H” crochet hook
Round 1: Ch 3, sl st to form a ring. Ch 1.
Round 2: 2 sc in each st, sl st join to beg of round. (16 sts). Ch 1.
Round 3: *2 sc in next st, sc* rep *.* around, mark each inc st, sl st join to beg of round. Ch 1.
Continue in pattern. Inc in each marked st moving markers as round is worked. Work to size desired.
Round 4: *sc to marker, sk 1* rep *.* around, sl st join to beg of round. Ch 1.
Repeat Round 4 until piece measures head size. To finish, work 2 rounds of sc.
This pattern is copyrighted and printed with permission and may be used for your personal use only.
It may not be copied or reproduced in any form, sold, or copied or posted to another web site.
Crocheted Patches Slippers
worsted weight yarn or any scraps to make different colored squares
size “G” crochet hook
Large Square for Sole and Sides:
Row 1: ch 5, join to form a ring. Row 2: ch 3, 4 dc, ch 1, 5 dc, ch 1, 5 dc, ch 1, 5 dc, join to top of ch 3. Row 3: 1 sc in each dc, working 3 sc in each corner. Row 4: ch 3, 1 dc in each sc, working 2 dc, ch 1, 2 dc in each corner, join. Row 5: ch 1, sc in each dc, 3 sc in each corner, join. Row 6: ch 3, 1 dc in each sc, 2 dc, ch 1, 2 dc in each corner, join. Row 7: ch 1, 1 sc in each dc, 3 sc in each corner, join. Row 8: ch 3, 1 dc in each sc, 2 dc, ch 1, 2 dc in each corner, join. Row 9: ch 1, 1 sc in each dc, 3 sc in each corner, join. Row 10: ch 3, 1 dc in each sc, 2 dc, ch 1, 2 dc in each corner, join, cut yarn.
Small Squares for Toe and Top of Slipper:
Row 1: ch 5, join to form a ring. Row 2: ch 3, 4 dc, ch 1, 5 dc, ch 1, 5 dc, ch 1, 5 dc. Join to top of ch 3. Row 3: ch 1, 1 sc in each dc, 3 sc in each corner, join. Row 4: ch 3, 1 dc in each sc, 2 dc, ch 1, 2 dc in each corner. join. For Heel and Cuff make 2 squares: Work same as for toe square adding row 5. Row 5: ch 1, sc in each dc, 3 sc in each corner, join, cut yarn.
Join all pieces. make 2.
This pattern is copyrighted and printed with permission and may be used for your personal use only.
It may not be copied or reproduced in any form, sold, or copied or posted to another web site.
Ruffle Edge Slippers
worsted weight yarn
size “G” crochet hook
Work in back loops of sc throughout slipper. (Child’s size in parenthesis)
Ch (8)11, sc in 2nd ch from hook and across row (7)10 sc. Continue for (20)22 rows, or for desired toe width. Turn and working along side edge put 1 sc in each row (20)25 sc. Work back and forth for (12)20 rows or for desired length of foot. Fasten off. Sew together the first (20)25 rows to form toe section. Fold other end in half and sew up to form heel.
Edging: Sc in each row around, join with sl st. Ch 3 make 2 dc in same space, sl st into next st. Ch 3, and 2 dc continue on around. Fasten off. Make chain approx. 27” long. Thread the chain in and out below the edging – starting in front and going around and ending in front and tie a bow.
This pattern is copyrighted and printed with permission and may be used for your personal use only.
It may not be copied or reproduced in any form, sold, or copied or posted to another web site.
Scrap Slippers by Craft Yarn Council of America
Sizes: Small = 9”, Medium = 9-1/2”, Large = 10”
Size Note: Instructions are written in smallest size with changes for larger sizes in parentheses.
Materials: worsted weight yarn – 4.5 (5, 5.5 ) oz. [approx. 127.8 (142, 156.2) grams], any combination of scrap yarn can be used. Aluminum crochet hook – size H (5.5 mm) or size needed for gauge. Tapestry or yarn needle.
Gauge: 3 sc = 1”, 3 rows = 1”
Instructions
Note: Use double strand throughout. Colors may be changed at random.
Sole (make 2): Ch 7(7,8) loosely.
Row 1: sc in 2nd ch from hook and in each ch across; ch 1, turn: (6(6,7) sc.
Row 2: Work 2 sc in first sc (inc made), sc in each sc across; ch 1 turn: 7(7,8) sc.
Rows 3-5: Inc in first sc, sc in each sc across; ch 1, turn: 10(11,11) sc. Work even for 7(9,11) rows.
Dec Row: Dec in next 2 sts as follows: pull up a loop in each of first 2 sc, yo and draw thru all 3 loops on hook (dec made), sc in each rem sc across; ch 1, turn. Rep Dec Row twice more. Work even until piece measures 8-1/2 (9, 9-1/2)”.
Next Row: Dec, sc in each sc across to rem 2 sc, dec, ch 1, turn: 5(5,6) sc. Rep last row once more; finish off: 3(3,4) sc. Weave in yarn ends.
Top: (make 2): Ch 8(8,9) loosely.
Row 1: Sc in 2nd ch from hook and in each ch across; ch 1, turn: 7(7,8) sc.
Row 2: Working in back loop only (BLO), inc in first sc, sc in back loop of each sc across; mark for right side with contrasting yarn; ch 1. turn.
Rep Row 2, 11(13,14) times: 19(21,23) sc. Work 2 rows even.
Sides: Next Row: Working in BLO, sc in first sc and in each next 6(7,8) sc; ch 1, turn. Working in BLO, work even on 7(8,9) sc until 12 rows have been worked or until length is sufficient to reach center back of sole; finish off. Join yarn with sl st in 6th sc from side just worked, sc in back loop of same sc and in each of rem 6(7,8) sc across; ch 1, turn. Work in same manner as opposite side; finish off. Weave in yarn ends.
Finishing: Sew back seams of Sides, Position Top so that center st of Top toe matches center st of Sole toe and center back seam of Sides matches center st of Sole heel. sc thru both thicknesses around Sole; finish off. Weave in any yarn sends.
This pattern is copyrighted and printed with permission and may be used for your personal use only.
It may not be copied or reproduced in any form, sold, or copied or posted to another web site.
Crocheted Waistcoat
size 34, changes for (37) and (40) are in parentheses.
size 1 crochet hook or whatever sized hook is needed to produce the gauge
buttons
gauge: 3 sts = 1”, 8 rows = 3”
BACK:
Ch 45(49,53) to measure approx 15” (16-1/2”, 17-1/2”).
Row 1: Sc in 2nd ch from hook, *dc in next ch, sc in next ch*, rep *.* to last ch, hdc (44,48,52 sts), ch 1, turn.
Row 2: Sc in first hdc, *dc in next sc, sc in next dc*, rep *.* to last st, hdc. Ch 2, turn (counts as 1 hdc).
Row 3: Sc in first st (inc made), continue pattern to last st, in last st work dc and hdc (inc made) (46,50,54 sts). Ch 2, turn (counts a 1 hdc).
Row 4: Sk first st, sc in next st, continue pattern, end sc in top of ch 2 (46,50,54 sts). Ch 2, turn. Repeat row 4 three times. Ch 2, turn.
Row 8: Dc in first st (inc made), continue pattern, end sc and hdc in top of tch (inc made) (48,52,56 sts). Ch 1, turn.
Rows 9-12: Rep Row 2. Ch 2, turn.
Row 13: Rep Row 3 (50,54,58 sts).
Rep Row 4 until piece measures 6-1/2” from beg or desired length to underarm (allow for 1” border at lower edge). Turn, do not ch.
Armholes:
Row 1: Sl st in 5 sts, ch 2 (counts as 1 st), sc in next dc, continue pattern to last 5 sts (2nd dc from end), hdc in next dc – 4 sts bound off each side – (42, 46, 50 sts). Ch 2, turn (does not count as 1 st).
Row 2: Sc in first dc, continue pattern to last sc, hdc in last sc (40,44,48 sts). Ch 2, turn (does not count as 1 st).
Row 3: Dc in first sc, continue pattern, end sc in last dc (38,42,46 sts). Ch 2, turn (does not count as 1 st).
Row 4: Rep row 2 (36,40,44 sts). Ch 2, turn (counts as 1 hdc.)
Row 5: Dc in fist sc, continue pattern, end hdc in last st. Ch 2, turn (counts as 1 hdc).
Row 6: Dc in first sc, continue pattern, end hdc in top of tch. Ch 2, turn.
Repeat Row 6 until armhole measure 9-1/2” (10”, 10-1/2”). Fasten off.
FRONTS: (make 2 reversing pattern)
Ch 5(7,9) for edge.
Row 1: Sc in 2nd ch from hook, (dc in next ch, sc in next ch) 1(2,3) times. Hdc in last ch (4,6,8 sts). Ch 2, turn.
Row 2: Sc in first hdc (inc), dc in next sc, in next dc work sc and dc, in last sc work sc and hdc (2 st inc as underarm edge) (7,9,11 sts).
Row 3: Ch 4, turn. Dc in 4th ch from hook (2 st inc), sc in next hdc, continue pattern to tch, sc and hdc in top of tch (inc) (10,12,14 sts). Ch 2, turn.
Row 4: Sc in first hdc, continue pattern to last dc, sc and dc in last dc, sc and hdc in top of tch (13,15,17 sts).
Row 5: Repeat Row 3 (16,18,20 sts).
Row 6: Repeat Row 4 (19,21,23 sts).
Row 7: Repeat Row 3 (22,24,26 sts). This completes point. Ch 1, turn.
Row 8: Sc in first hdc, *dc in next sc, sc in next dc* rep *.* to last st, hdc (22,24,26 sts). Ch 1, turn. Keeping front edge even, continue in pattern, inc 3 times at underarm edge as on Back. Work even on 25(27,29) sts to same length as Back to armholes, end at underarm edge.
Armhole: Shape as on 1 side of Back (18,20,22 sts). Work 2 rows even, end at underarm edge. Ch 1, turn.
Neck:
Row 1: Work in pattern to last 2 sts, hdc in next st (17,19,21 sts). Ch 2, turn.
Row 2: Sc in next dc, continue in pattern to end (17,19,21 sts). Ch 1, turn.
row 3: Work pattern to last 2 sts, hdc in last sc (16,18,20 sts). Ch 1, turn.
Row 4: Rep Row 2 (16,18,20 sts). Rep last 4 rows 4 times. Work on 8(10,12) sts to same length as Back. Fasten off.
FINISHING: Join shoulder and side seams.
BAND: Join yarn at left underarm seam.
Round 1: From right side, work sc in each st on lower edge, continue sc on edge of point (spacing sts to keep edge flat) to cast on sts for point, sc in each of 2(4,6) sts, 2 sc in each of next 2 sts (mark), continue in sc on other side of point (spacing sts to keep flat) to last inc row. 2 sc in last inc row (mark), sc on front edge to first neck dec, 2 sc in dec (mark), continue sc on front and across back neck edge. Work other side to correspond (count sts to be sure there are the same number between markers). Join with a sl st to first sc. Ch 1, do not turn.
Round 2: Sc in each sc, 2 sc at points and marked sts, join. Ch 1. With pins mark places on right front edge for buttonholes, first pin opposite first marker (top of point), last pin opposite neck dec marker, other pins evenly spaced between.
Round 3: work as Round 2 to first pin, ch 1, sk 1 st for buttonhole, *sc in each st to next pin, ch 1, sk 1 st* Rep *.* until all buttonholes are completed, continue as Round 2 to end. Join.
Round 4: Sc in each sc and each ch-1 of buttonholes. Join and fasten off.
ARMHOLES BANDS: Round 1: From right side, beg at underarm seam, work sc around armholes spacing sts to keep edge flat. Join, work 2 rounds of 1 sc in each st. Join and fasten off.
Sew buttons opposite buttonholes. Weave in ends.
This pattern is copyrighted and printed with permission and may be used for your personal use only.
It may not be copied or reproduced in any form, sold, or copied or posted to another web site.
Lightweight Pocketed Vest
Instructions are for size 30-1/2”-31-1/2” with (32-1/2-34”, 36”) in parenthesis.
finished size, closed: 32-1/2”(35”,37”)
5(6,6) skeins sport weight yarn
size “F” crochet hook
5 buttons
gauge: 11 sts = 2”, 6 rows = 1”
Note: To bind off sts at beginning of row, sl st loosely across sts for specified number of sts, sl st in next ch 1 sp, ch 2, sc in next ch 1 sp, finish in pattern across row; at end of row, leave specified number of sts un-worked.
BACK: Beginning at lower edge, ch 86(94,100).
Row 1: sc in 4th st from hook, *ch 1, sk next ch, sc in next ch* rep *.* to end, 42(46,49). Ch 2, turn.
Row 2: *sc in ch 1 sp, ch 1* rep *.* to end, end sc in turning ch, 42(46,49) sc or 83(91,97) sts plus turning ch, 15-1/2”(17”,18”). Repeat Row 2 until piece measures 11” from beginning. Ch 1, turn.
Armhole: Row 1: Bind off 4 sc each side, 34(38,41) sc. Ch 2, turn.
Row 2: Sc in ch 1 sp, sc in next ch 1 sp (1 st dec), ch 1, sc in next ch 1 sp, work in pattern to last 2 sc, ch 1, sc in next ch 1 sp, sc in ch 2 turning sp (1 st dec). Ch 2, turn.
Row 3: Sc in ch 1, work pattern across, ending sc in ch 1 sp, ch 1, sc in ch 2 turning sp (I st dec each side). Ch 2, turn. Repeat Rows 2-3, 1(2,3) times, 30(32,33) sc.
Work even until armhole measures 7-3/4”(8”,8-1/2”) above bound off sts. Ch 1, turn.
Neck and Shoulder Shaping:
Row 1: Bind off 3 dc, (ch 1, sc in next ch 1 sp) 7(7,8) times. Ch 2, turn.
Row 2: Sc in ch 1 sp, (ch 1, sc in next ch 1 sp) 3 times. Fasten off. Sk next 10(12,11) sc on last long row; join yarn in next ch 1 sp, ch 2, sc in next ch 1 sp, (ch 1, sc in next ch 1 sp) 5(5,6) times. Ch 1, turn.
Row 3: Bind off 2(2,3) sc, work across. Fasten off.
Pocket Linings (make 2): Ch 24. Work in pattern on 12 sc for 3”. Fasten off.
RIGHT FRONT:
Beginning at lower edge, ch 28(30,32).
Row 1: Work pattern Back Row 1, working 2 sc in last ch 14(15,16) sc. Mark end of last row for center edge. Ch 1, turn.
Row 2: Work sc in first sc, (ch 1, sc in next ch 1 sp) 3 times-5 sc. Ch 1, turn.
Row 3: Work in pattern across, working 2 sc in last sc-5 sc. Ch 1, turn.
Row 4: Work sc in first sc, *ch 1, sc in next ch 1 sp* rep *.* 6 times more, working sc in ch 1 turning ch 1 of last row-9 sc. Ch 1, turn. Last 3 sts picked up from row 1. (starts shaping of v-neck)
Row 5: Repeat Row 3-9 sc.
Row 6: Work 2 sc in first sc, *ch 1, sc in next ch 1 sp* rep *.* 10 more time-13 sc. Ch 1, turn.
Row 7: Repeat Row 3-13 sc.
Row 8: Work 2 sc in first sc, *ch 1, sc in next ch 1 sp* Rep *.* across-18(19,20) sc. Ch 2, turn.
Row 9: Work in pattern across, end 2 sc in last sc. Ch 1, turn. Repeat last 2 rows until 24(26,28) sc. Work even until edge measures 4” from start, ending at center edge.
Pocket Openings: Work in pattern for 7(8,9) sc, work in pattern across one pocket lining; sk next 12 sc; finish row-24(26,28) sc.
Continue working even until side edge measures 1” less than Back to underarm, end side edge.
Shape Neck and Armhole: Dec 1 st at center of next row, then every 4th row 3 times, every 3rd row 2(4,6) times; at the same time, when side edge measures same as Back, bind off 4 sc at arm side once, then dec 1 st at same edge every row 4(6,8) times. When center dec are completed, work even if necessary on rem 10(10,11) sc until armhole measures same as Back.
Shape Shoulder: Bind off 3 sc at arm side once, 3 sc at arm side of next row. Fasten off.
LEFT FRONT: Work same as for Right Front reversing pattern and shaping. Join shoulder and side seams.
OUTER BORDER: Round 1: Join yarn in lower left side seam; from right side, work sc around entire outer edge of vest, working 3 sc in each point and 2 sc at start of neck shaping, having the same number of sc on each front. Join with sl st in first sc. Ch 1, do not turn. With pins, mark the position of 5 buttonholes on right front edge, having first buttonhole ½” above lower front edge, 5th buttonhole ½” below start of neck shaping.
Round 2: Working 3 sc in each point, *sc in each st to within 1 st before pin, ch 2, sk next 2 sc, sc in next sc* rep *.* 4 times, sc in each rem sc. Join.
Round 3: Sc in each sc and ch around.
Round 4 & 5: Sc in each sc, working 3 sc in each point. Fasten off.
FINISHING: Block as required. Sew pocket linings to wrong side of Fronts; work 5 rows sc along upper edge of pocket openings. Sew side edge of pocket to border in place. Work 5 rounds sc around each armhole, dec at curve of underarm and shoulder as required to fit. Sew on buttons. Weave in ends.
This pattern is copyrighted and printed with permission and may be used for your personal use only.
It may not be copied or reproduced in any form, sold, or copied or posted to another web site.
Priceless Pretzel Pullover Stripe Sweater (Beginner)
8 skeins of various textures of sport weight yarn
for small “E” crochet hook, for medium “F” crochet hook, for large “G” crochet hook
NOTE: Corners are created by placing 3 sts in one existing corner st. Increase in corner sts in each row of sweater. Always join each row with a slip st. ** indicates a color or yarn change, as desired.
Ch 156, being careful not to twist chain and join with a sl st to form a ring.
Row 1: Ch 3, 2 dc in same st, 1 dc in next 76 sts, 3 dc in next 2 sts, 1 dc in next 76 sts, 3 dc in next st, join with a sl st. Row 2:Dc around (remember to dc, ch 1, dc in the 3 dc corner groups of row below). Row 3: ** Sc around, making sc, ch 1, sc in corner sts. Row 4: Hdc in back loop only around. Row 5: Sc in back loop only around. Row 6: Repeat Row 4. Row 7: repeat Row 5. Row 8: ** Ch 5, (1 tr and ch 1 in corner), tr in back loop only around. Row 8: ** Sc in back loop only around, increasing in corners as before. Rows 10 and 11: Repeat Row 9, using same color of yarn. Row 12: ** Ch 4, dc in corner, then Twist Stitch Around (Twist st, sk 1 st, dc in next sc, then dc in skipped st from behind), dc, ch 1, dc in corners around. Row 13: Repeat Row 12, using same color of yarn. Row 14: ** Sc around. Rows 15 through 17: Repeat Row 14, using same color of yarn. Row 18: ** Dc around. Row 19: Repeat Row 18, using same color of yarn. Row 20: ** Repeat Row 3. Rows 21 through 25: Repeat Rows 4-7. Row 26:** Tr in each st around, increasing in corners as usual. Row 27: ** Sc around. Rows 28 through 30: Sc around. Row 31: ** Hdc around. Row 32: Ch 1 in same corner space, omitting side sts, sc in next corner space, omit side sts and sc in next corner and across, join with a sl st. Rows 33 and 34: Ch 2 and hdc in each st around.
**WAIST BAND RIBBING: With RS facing, ch 3, 1 dc in each st around, join. Row 1: Ch 2 (counts as 1 st dc), *yo, starting with hook at front of work insert hook from right to left behind stem of next st and through to front again, yo and pull through loop, yo and pull though 2 loops, yo and pull through remaining 2 loops on hook (one FRONT RAISED DC worked); yo, starting with hook at back of work, insert hook from right to left in front of stem of next st and through to back again, yo and pull through loop, yo and pull through 2 loops on hook, yo and though 2 loop on hook (one BACK RAISED DC worked)*; repeat from *.* to end. Row 2: Work as for Row 1, working BACK RAISED DC over BACK RAISED DC and FRONT RAISED DC over FRONT RAISED DC (this will create vertical lines of ribbing). Repeat Rows 1 and 2 for two or more inches or desired length of ribbing. NOTE: If desired, a k 1, p1 ribbing may be used.
Join side seams leaving 8”(8”,9”) for armhole. OPTIONAL: Work one row of sc and one row of reverse sc around neck opening and armholes, if desired.
This pattern is copyrighted and printed with permission and may be used for your personal use only.
It may not be copied or reproduced in any form, sold, or copied or posted to another web site.
Priceless Pretzel Pullover Stripe Sweater (Intermediate/Advanced)
8 skeins of various textures of sport weight yarn
for small “F” crochet hook, for medium “G” crochet hook, for large “H” crochet hook
The following sts are used: CROSS STITCH - *sk next st, dc in next 3 sts, yo, insert hook from front to back in skipped st and complete a dc* rep *.* around. POPCORN STITCH – work 4 dc in 1 st, drop loop from hook, insert hook in 1st dc made and draw loop through. FLOWER STITCH – Row 1: ch 3, hold back last loop of each dc, dc in next 2 sts, yo, draw through all sts on hook, ch 1 (to form eye), ch 2, *holding back last loop of each dc, dc in eye twice, dc in next dc 3 times, yo and draw through all loops on hook* rep *.* around, join. Row 2: Ch 3, 2 dc in first eye, 3 dc in each eye around, join. STAR STITCH – Row 1: Draw a loop in each of next 3 sts, yo and draw through all loops on hook, ch 1 for eye (starting star stitch made), *draw up a loop in eye of star st just made, drawing up each loop to same height, draw up a loop in back of last drawn up loop, draw up a loop in next 2 sts, yo and draw through all 5 loops on hook, ch 1 for eye (star st made)* rep *.* around. Row 2: Make 2 hdc in eye of each star st around.
RIBBING: With color 1, ch 16.. Row 1: sc in 2nd ch from hook and in each ch across (15 sc), ch 1 turn. Row 2: sc in back loop of each sc across (15 sc), ch 1, turn. Repeat Row 2 until ribbing measures 30”(34”,36”) slightly stretched. Slip st ends together to form a circle.
BODY: Row 1: With color 1, sc across ribbing approx. 144 sc. Join and fasten off. Row 2: Attach color 2, ch 1, sc across 72sts, ch 144, sc across 72 sts, ch 144, join. Row 3: Sl st across 2 sts, ch 3, dc in next 68 sts, skip 4 sts, dc across 140 sts of chain, skip 4 sts, dc across 69 sts, skip 4 sts, dc across 140 sts of chain, join and fasten off. Row 4: Skip 34 sts, attach yarn, ch 3, dc in back loop around, skipping 2 sts over previously skipped sts. NOTE: On each row, always skip 2 sts over previously skipped sts. Row 5: Attach color 3, ch 1, sc in back loop around, join. Row 6: With color 3, ch 3, work Cross Stitch around, join. Row 7: With color 3, ch 3, work Cross Stitch around, join. Row 8: With color 3, ch 1, sc around, join and fasten off. Row 9: Attach color 4, ch 1, sc in back loop around, join. Row 10: With color 4, ch 3, dc in next 8 sts, *make a Popcorn Stitch, dc in next 8 sts* rep *.* around, join. Row 11: With color 4, ch 1, sc in each sc around, join and fasten off. Row 12: Attach color 5, ch 1, sc in each st around, join. Row 13: With color 5, ch 1 sc in each st around, join and fasten off. Row 14: Attach color 6, ch 1, sc in back loop around, join. Row 15: With color 6, work Row 1 of Flower Stitch, join. Row 16: With color 6, work Row 2 of Flower Stitch, join. Row 17: With color 6, Ch 1, sc in each st around, join and fasten off. Row 18: Attach color 7, ch 3, dc in each st around, join. Row 19: With color 7, ch 3, dc in each st around, join and fasten off. Row 20: Attach color 8, ch 1, sc in each st around, join. Row 21: With color 8, work Row 1 of Star Stitch, join. Row 22: With color 8, work Row 2 of Star Stitch, join. Row 23: With color 8, sc in each st around, join and fasten off. Row 24: Attach color 2, ch 1, *sc in next sc, ch 1 skip 1 st* rep *.* around, join. Row 25: With color 2, ch 1, sc in next sc, *ch 1, sc in next sc* rep .* around, join. Row 26: Attach color 3, dc in each sc and ch 1 around, join, and fasten off. Row 27: Attach color 4, ch 1, sc in back loop around, join and fasten off. Row 29: Attach color 5, ch 3, dc in back loop around, join. Row 29: With color 5, ch 3, dc in back loop around, join and fasten off. Row 30: Attach color 6, ch 1, sc in back loop in each st around, join. Row 31: With color 6, ch 1, sc in next sc *ch 1, sc in next st, skip 1* rep *.* around, join and fasten off. Row 32: Attach color 7, ch 3, dc in each sc and ch 1, around, join and fasten off. Row 33: Attach color 1, ch 1, sc in back loop around, join. Row 34 – Finish: Ch 1, sc in back loop around, join until decreases meet, Next Row: Ch 1, work one row of reverse sc around, fasten off. Join side seams leaving 8”(8”,9”) for armholes. Work one row of sc and one row of reverse sc around armholes with color 1.
This pattern is copyrighted and printed with permission and may be used for your personal use only.
It may not be copied or reproduced in any form, sold, or copied or posted to another web site.
Quickie One Skein Lacy Top or Vest
1 skein worsted weight yarn
for small/medium, size “K” and “N” crochet hooks
for large, size “N” and “Q” crochet hooks
Instructions are for small/medium with large in parenthesis.
Ribbing: With K(N) hook, ch 9(7).
Row 1: sc in 2nd ch from hook, sc across row, ch 1, turn.
Row 2: sc in back loop across, ch 1, turn. Repeat 34(30) times. at end, ch 1, do not turn.
Body: With N(Q) hook.
Row 1: Working along long edge, loosely work 36(32) sc, ch 1, turn.
Row 2: Loosely work 36(32) sc, ch 1, turn. Repeat 28 times.
Make 2.
Join pieces together at side seams leaving 7” open at top for armholes. Join shoulder seam, leaving 10” open at center for neck.
Belt: ch 40, finish off. Weave through loops.
This pattern is copyrighted and printed with permission and may be used for your personal use only.
It may not be copied or reproduced in any form, sold, or copied or posted to another web site.
Triangular Shell Shawl
crochet “J” hook or whatever sized hook is needed to produce the gauge
gauge: long dc are drawn up to measure 1-1/2”
Ch 5, join with a sl st to form a ring, ch 5.
Row 1: 7 long dc in ring (shell). Ch 3, turn.
Row 2: dc in 2nd st from hook and in each long dc of shell around row. End dc in top of turning ch. Ch 5, turn.
Row 3: 7 long dc in 1st dc (shell made), hdc in center st of same shell, 8 long dc in top of turning ch (shell made), ch 3, turn.
Row 4: 1 dc in 2nd st from hook and in each long dc of shell, hdc around hdc of previous row, 1 dc in each long dc of shell. End, dc in top of turning ch. Ch 5, turn.
Row 5: 7 long dc in 1st dc (shell made), hdc in center st of same shell, 8 long dc in top of next hdc, hdc in center of next shell. End, 8 long dc in top of turning ch. Ch 3, turn.
Repeat rows 4 and 5 for pattern.
Continue until there are 19 shells across top edge or desired length. End with row 5 of pattern.
Row 6: Repeat row 4, dec 1 st in center of each shell pattern. Continue in pattern across row.
Row 7: Ch 1, do not turn, work 1 sc in each dc across row toward right hand skipping hdc, do not fasten off on last st. Working along side edge, *ch 9, sc into base of each shell*. Repeat *.* along side edge, bottom, and other edge. Ch 9 turn, *sc under each loop, ch 9* repeat *.* for 2 rows. End sc under last loop. Fasten off.
Fringe: Cut 10 strands of yarn 12” in length. Fold in half, draw through and under each ch 9 loop.
This pattern is copyrighted and printed with permission and may be used for your personal use only.
It may not be copied or reproduced in any form, sold, or copied or posted to another web site.
